ELECTRA-KOOL™ MODEL 2000 CFM BLOWER
Our two biggest Electra-Kool™ models are too large for most electrical cabinets, but are ideal for cooling large DC motors. Models 2000 CFM blower & 3000 CFM blower force thousands of cubic feet of filtered air per minute into your DC motors, keeping them clean and cool. Electra-Kool™ is low-cost insurance against motor malfunction due to excessive heat. You’ll save a boat load of money in preventative maintenance costs.
ELECTRA-KOOL™ 2000 CFM BLOWER FEATURES:
- 2000 CFM of air flow.
- Recommended capacity: 400 HP DC motor
- 36” height, 14.5” deep, 16” wide
- Rugged cast aluminum housing
- Heavy-Duty Steel Impeller
- 9” square flange (rounded corners, 6.5” hole to hole) that mounts easily
- Long lasting filter life due to huge surface area… 90 SQ FT!
- Simple assembly! Filters require just one wingnut – great for quick cleaning
- Finger-guards installed on both the inlet and outlet for your safety
- One year manufacturing warranty – just in case.
MODEL 2000 PART NUMBERS & SPECS
| 3 Phase Part # | FILTER | Height | Width | Depth | Accessories | Ship Weight |
|---|---|---|---|---|---|---|
10350 |
Metal Mesh (coarse) |
41″ |
16″ |
14.5″ |
Filter Mounting Hardware Only |
~150 lbs (LTL) |
10351 |
NONE |
21″ |
16″ |
14.5″ |
Filter Mounting Hardware Only |
~120 lbs (LTL) |
10353 |
Pleated Paper (fine) |
41″ |
16″ |
14.5″ |
Filter Mounting Hardware Only |
~150 lbs (LTL) |
MODEL 2000 MOTOR SPECIFICATIONS
Three Phase Only
5 HP, 3450 RPM, 184TC Frame
208-230/460V, 60Hz TEFC
Amps: 12.0 @ 208V, 11.8 @ 230V, 5.9 @ 460V
UR, CSA, & EEV Listed
This Rugged 2000 CFM Blower is STOCKED for SAME DAY SHIPPING.
MODEL 2000 FILTER SPECIFICATIONS
- Metal Mesh filter (coarse filtration, shown above)
- Rated 60% @ AC Fine Dust
- Four layers of corrugated aluminum mesh
- Long-lasting, corrosion resistant protection against coarse particulates
- PREFILTER WRAPS are provided along with Blowers with Pleated Paper or HEPA filters
- ½” thick, non-woven polyester to pick up larger particles and extend the life of the main filter
This Rugged 2000 CFM Blower is STOCKED for SAME DAY SHIPPING.
MODEL 2000 PARTS & SPARE FILTERS
| Part # | Description (sometimes seen along with P/N) | TYPE | DETAILS |
|---|---|---|---|
10352 |
2000-MM |
Metal Mesh Filter (coarse filtration) |
19.5″ height x 12″ OD |
13209 |
2000-PL |
Pleated Paper Filter (fine filtration) |
19.5″ height x 12″ OD |
13212 |
2000-PFB |
Prefilter Wrap |
1/2″ Woven Polyester, extends life of main filter |
10195 |
2000-MMKIT |
Metal Mesh FilterKIT™ |
Includes MM Filter, Filter End Cap, & mounting hardware |
12907 |
2000-IMPKIT |
Impeller Replacement Kit |
Includes new impeller (squirrel cage), Fingerguard, and sealant |